EU LED wall controller RGB

Place of Origin: Guangdong,China (Mainland)
Input: 12-24V DC
Output: 4A*3CH
12V: 144W output
24V: 288W output
Certificates: CE RoHS

inquiry

skype basketAdd to Basket  Edit

Share |

Product Description

Payment & Shipping Terms Supply Capacity
Unit Price:10.0 USDProduction Capacity:1000pcs a week
Trade Term:FOB,EXWPacking:color box, netual
Payment Terms:T/T, WUDelivery Date:10-15days
Min. Order:20 Piece/Pieces
Means of Transport:UPS DHL, Ocean, Air

LED wall controller RGB


Wall mounted LED wall controller RGB for 12V 24V RGB LED lights with glass panel design and  high precision capacitance touch control chip, can carry out jumpy changing,gradual changing, strobo flash and other effects of change. They are wildly used for a variety of RGB LED, like, point source of light, flexible LED  light strip, wall washer lamp, panel lights etc.,


supply voltage: DC12-24V 

output current: <4A( each channel )

output power: 12V<144W,24V<288W

external dimension: L80*W80*H41 mm


Built-in 19 changing modes and 20 static modes

for 19 changing modes

for 20 static modes

20 Static modes

19 changing modes

1

Red

1

Red burst flashing

2

Orange

2

Green burst flashing

3

Deep-yellow

3

Blue burst flashing

4

Yellow

4

Yellow burst flashing

5

Light-yellow

5

White burst flashing

6

Green

6

Three color burst flashing

7

Light green

7

Three color flash

8

Cyan

8

Three color jumpy changing

9

Light-blue

9

Six color jumpy changing

10

Sky-blue

10

Red fade in and out

11

Blue

11

Yellow fade in and out

12

Deep-blue

12

Green fade in and out

13

Blue-purple

13

Cyan fade in and out

14

Purple

14

Blue fade in and out

15

Brown

15

Purple fade in and out

16

White

16

White fade in and out

17

Ivory

17

Three color fade in and out

18

Pink-white

18

Seven color fade in and out

19

Yellow-white

19

Seven color gradual changing

20

Blue-white



Insatllation instruction

Connect the wire according to the typical application circuit. Refer to the typical application circuit.

Open touch panel

Gently pry gaps in touch panel with a screwdriver, and then you can remove the panel, as shown below;

Install switch base

As shown in the picture, mount the controller on the cassette in the wall after connecting the wire, and then nail the screw, fix it on the wall, finally you can install the switch pedestal on the wall;

Cover the touch panel

Note: 

1. Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;

2. The supply voltage of controller ranges in DC12-24V, it may burn out the controller once exceed the voltage.

 

 

 

 


Category: RGB LED Controllers

Related Category: DMX512 LED Controller  LED Dimmer Controller 


QR Code
Contact Us
Welcome to Prime LED !