DMX512 Decoder LED Controller

Place of Origin: Guangdong,China (Mainland)
Input: 12-24V DC
Output: 3Ch*4A
Certificates: CE RoHS
Warranty: One Year
Remoter: RF
Connect mode: common anode

inquiry

skype basketAdd to Basket  Edit

Share |

Product Description

Payment & Shipping Terms Supply Capacity
Unit Price:10.0~15.0 USDProduction Capacity:10,000pcs a week
Payment Terms:T/T, WUPacking:color box, netual
Min. Order:5 Piece/PiecesDelivery Date:10-15days
Means of Transport:UPS DHL, Ocean, Air

DMX512 Decoder LED Controller


DMX512 Decoder LED Controller adopts the advanced micro control unit,  it can receive the DMX-512 standard

digital control signal and exchanges the signal into PWM control signal for  the LED lights. It can also connect the DMX digital console to change the light or each dynamic effect.


Input and output of the DMX decoder

DMX input/output interface:



DMX512 Decoder LED Controller

Working temperature

-20-60℃

Supply voltage

12V~24V

0utput

3 channels

Connecting mode

common anode

External dimension

L127*W42*H33 (mm)

Packing size

L135*W55*H40 (mm)

Net weight

140g

Gross weight

160g

Output gray

256 levels (RGB each)

Output current

<6A(each channel)

Output power

12V:<216W,  24V:<532W

Frequency of RF remote control

433.9MHz

Frequency of PWM signal output

5.2KHz


Address code and set feature service interface:

manual establishment address.

Each universal DMX controller takes up 3 DMX addresses. It adopts 2 ways (autoindex addressing and code switch) to set up the address. When adopting the autoindex addressing, all switches are ¡off¡ status. When adopting the code witch to set up address, the 10th bit(FUN) is ¡off¡ status, and other 9 bits are binary value code switch which are used to set up the DMX starting address code. The first bit is the lowest order bit, and the ninth is the highest order bit. That can set up 511 address codes. The DMX starting address code is equal to the sum of 1st to 9th bit. If move down one bit of code switch (¡ON¡ set ¡1¡), you can get the placevalue of this bit. If move up (set ¡0¡), the placevalue is 0. 

For example: if you want to set up DMX starting address code for 73, you should move down the 7th, 4th, and 1st bit of code switch for ¡1¡, and others for ¡0¡, Then the placevalue¡s sum of 1st to 9th bit is 64+8+1. That is to say, the DMX512 starting address code is 73.


Connection diagram





Category: DMX512 LED Controller

Related Category: RGB LED Controllers  LED Dimmer Controller 


QR Code
Contact Us
Welcome to Prime LED !