11.5W 48LED/M 5050SMD LED strip light 12V
11.5W 48LED/M 5050SMD LED strip light 12V comes with 5050SMD, 48LEDs/M, 11.5W, all single colors and RGB are available, both waterproof type and Non-WP. They are available in four varieties:
A) Regular Flex strip, 3M tape on backing, IP20;
B) Water resistance type with an encapsulated plastic Gel, 3M tape on backing, IP66;
C) Water resistance type with a protective Silicone jacket, can be fixed with clips, IP66
D) Waterproof type with silicone jacket and Gel inside, IP67.
Technical Data of 11.5W 48LED/M 5050SMD LED strip light 12V
Part NO.(IP20) | PFS-5050X48A-12 |
Voltage: | 12V or 24V |
Size: | 10mm wide, 5meters a reel |
LED Type: | 5050SMD |
Quantity: | 48 LEDs permeter |
Power: | 11.5W permeter |
Color: | Red, green,blue,yellow,white, warm white,RGB |
PCB in: | Copper, white or black |
Beam Angle: | 120 degrees |
Expected Life | 50,000hours |
Warranty: | Two Years |
FAQ:
1. Can we cut 11.5W 48LED/M 5050SMD LED strip lighting non-waterproof ribbons in short pieces, and re-joint?
Yes, can be cut in every 3 LEDs, minimum, and can re-joint with cables.
2. How Can I make them dimmable or color-changing?
First, you need a power supply (transformer) to convent main voltage to 12V or 24VDC;
Second, get a dimmer or controller from us or your market, wire them follow our instruction, and then power on;
Third, you go¡
3. How can I do with them to work at 10meter long or more?
If only strips without dimmer or controller, get power in parallel;